Electrical Engineering

Department of Electrical and Computer Engineering

Biomedical Engineering Option in Electrical Engineering
Computer Engineering Option in Electrical Engineering
Control & Instrumentation (Robotics, Mechatronics)
Power & Renewable Energy Systems (Electric, Machines, Power Devices)
Communications (Wireless, Networking)
Signal Processing (Filtering, Sensors)

Faculty

• Biletskiy, Yevgen, MCS, PhD (Kharkiv), PEng, Prof - 2003
• Castillo-Guerra, Eduardo, BSc, MSc (UCLV), PhD (UNB), PEng, Prof - 2006
• Chang, Liuchen, BSc (N.Jiaotong), MSc (China Acad. of Railway Sciences), PhD (Qu.), PEng, Prof - 1992
• Colpitts, Bruce, BScE, MScE, PhD (UNB), PEng, Prof - 1988
• Diduch, Christopher, BScE, MScE, PhD (UNB), PEng, Prof - 1981
• Doraiswami, Rajamani, BEE (VJI, Bombay), MEE (IIS, Bangalore), PhD (Johns H), PEng, Prof Emeritus
• Englehart, Kevin, BScE, MScE, PhD (UNB), PEng, Prof and  Director Inst of Biomedical Eng -1998
• Hill, Eugene, BScE, MScE (UNB), PhD (NC State), PEng, Hon Res Prof
• Hudgins, Bernard, BScE, MScE, PhD (UNB), PEng, Hon Res Prof
• Kaye, Mary E., BScE (UNB), MEng (Car), PEng, Prof – 1979
• Li, Howard, BEE (Zhejiang), MScE (Guelph), PhD (Wat), PEng, Prof - 2007
• MacIsaac, Dawn, BPE (McM), BEd (Qu.), BEng (McM), MScE (UNB), PhD (UNB), PEng, Assoc Prof (Joint Computer Science) - 2001
• Meng, Julian, BScE (UNB), MSc, PhD (Qu.), PEng, Prof - 2002
• Narraway, John J., MSc, PhD (Cran IT), PEng, Hon Res Prof
• Parker, Philip A., BScE (UNB), MSc (St And), PhD (UNB), PEng, Professor Emeritus
• Petersen, Brent R., BEng (Car), MASc (Wat), PhD (Car), PEng, Assoc Prof - 1997
• Saleh, Sal, A.M., BSc (Bir Ziet), MSc, PhD (Memorial), P.Eng, Assoc Prof - 2011
• Sensinger, Jonathan, B.S. (Illinois), MSc, PhD (Northwestern), PEng, Assoc Prof and Associate Director of Inst. of Biomedical Eng -2013
• Scheme, Erik, BScE, MScE, PhD (UNB), P.Eng, Asst. Prof - 2016
• Stevenson, Maryhelen, BEE (Ga Tech), MSEE, PhD (Stan), PEng, Prof - 1990
• Taylor, James H., BSEE, MSEE (Rochester), PhD (Yale), Professor Emeritus
• Tervo, Richard, BSc, MSc (McM), PhD (Laval), PEng, Prof - 1986
• Wilson, Adam, BSc, MScE (UNB), PEng, Instructor - 2007

General Information

The Department of Electrical and Computer Engineering is multi-disciplinary, combining disciplines of Electrical, Computer and Software Engineering, the latter being jointly administered with the Faculty of Computer Science. The applications of Electrical and Computer Engineering are highly diversified with emphasis on the use of electrical devices and computers to solve real-world problems. Students in this program can develop expertise in renewable energy, communications, mechatronics, networking, microelectronics, signal processing and computer system design. Engineers graduated from our program experience a competitive advantage for a wide range of jobs in areas associated to industrial control, robotics, aerospace industry, cellular communication, biomedical technology, GPS systems, green power generation, smart vehicles, embedded computing, and computer games among many others. It also supports emerging research that advances technology and fosters scientific discovery.

The Department of Electrical and Computer Engineering is committed to delivering high quality programs that prepares students for successfully entering the workforce to become Professional Engineers or pursuing graduate studies. A foundation is first developed in mathematics, science and engineering. In their final year, students are then introduced to more specialized topics and broaden their knowledge by choosing a number of elective courses in Electrical and Computer Engineering or in such related areas as Mathematics, Physics, Computer Science and other Engineering disciplines. Some elective combinations can be formally recognized on the transcript through completion of an option. The program also makes available courses in cultural subjects that provide an awareness of social and professional perspectives both as individuals and as future engineers.

The Department of Electrical and Computer Engineering believes strongly in the value of relevant industrial experience. The Department endorses the Co-op Program and students who wish to gain industrial experience are strongly encouraged to participate in this internship program. Students planning to take Co-op are advised to consult with a program coordinator and/or advisor.

Required Courses

A minimum grade of C is required for all courses used for credit towards the B.Sc.E. degree. The following is a list of the courses that are core to the program.

Required Courses

Electives

In addition to the core courses there is also a requirement to complete six technical elective courses (minimum of 24 ch), three complementary studies electives (minimum of 9 ch), and one Science Elective (minimum 3 ch).

Basic Science Elective

Each student is required to take one 3 ch basic science course chosen from Physics, Chemistry, and the life or earth sciences.

Complementary Studies Elective
The EE program requires 9 credit hours of Complementary Studies electives. The choice of courses is subject to the Faculty of Engineering regulations for Complementary Studies Electives and the following:

a. At least 3 ch must be from the Humanities and Social Sciences related to technology and society (examples: HIST 3925 Technology and Society, SOCI 2534 Technology and Social Change).
b. An additional 3 ch must come from Humanities and Social Sciences (Anthropology, Classics, Literature, History, Philosophy, Political Science and Sociology).
c. The remaining 3 ch may be taken from: Administration, Technology Management and Entrepreneurship (TME) or the Humanities and Social Sciences. No more than 3 ch of language courses may be used for credit toward the B.Sc.E. Degree.

Students are encouraged to seek out courses of interest and value to them. The final choice of electives is subject to the approval of the Department of Electrical and Computer Engineering.

Technical Elective Courses
Each student is required to take six technical elective courses (minimum of 24 ch). At least four of the electives must be ECE courses from the following list (minimum 16 ch).

Biomedical Engineering Option in Electrical Engineering 

Biomedical engineering is the application of engineering principles to biological systems. This ECE option explores applications of Electrical Engineering that are ideally suited for Biomedical use. The purpose of the option is to give students experience with biomedical terminology and ways of thinking, such that they are familiar with the topics they would need to learn in an advanced degree in order to work with health-care providers, biomedical companies, and solve important problems that pertain to our health and well-being. 

Students may not enroll in the option until they have completed 80 ch, although they are encouraged to integrate appropriate coursework (including prerequisites) into their broader plan. Courses chosen to count towards the option must be approved by the option coordinator. Enrollment in this option will likely result in an extra term; students must ensure coursework schedules. 

The option compromises a project-based course in the area of biomedical engineering (described in section A below) along with 20 credit hours from UNB courses described in sections B-C below. Some of these courses taken as part of the option may also be used as technical electives in the EE program. 

Students must complete: 

A. One of the ECE 4040, TME 4025, SWE 4040, ENGG 4025 or ECE 4913 with a biomedical application. 

B. One of the APSC 3953 Basis of Biomedical Engineering (3ch) or ECE 4923 Intro to Biomedical Engineering (4ch) 

C. The remaining credit hours (16 or 17) must be selected from the following courses. An asterisk denotes highly recommended. 

Computer Engineering Option in Electrical Engineering

Computer Engineers use a combination of hardware and software to apply digital systems to solving real-word problems in many applications areas. The Computer Engineering Option allows EE students to enhance their electrical engineering fundamentals with software design and embedded hardware knowledge. 

Students may not enroll in the option until they have completed 80 ch, although they are encouraged to integrate appropriate coursework (including prerequisites) into their broader plan. Courses chosen to count towards the option must be approved by the option coordinator. Enrollment in this option will likely result in an extra term; students must ensure coursework schedules. 

The CMPE option requires a project-based course in the area of Computer Engineering (described in section A below) and 20 credit hours of UNB courses from sections B and C shown below. Some of these courses taken as part of the option may also be used as EE technical electives. The option coordinator may approve other courses. 

Section A: One project based course: Either ECE 4040, TME 4025 or ECE 4913 with a Computer Engineering Application. 

Section B: Select One 

Section C: Option Specific Courses list (select 16 Ch). One course labelled with a P is required. 

*Denotes highly recommended

P denotes a course with a major programming content

Recommended Program

The program allows completion of degree requirements in eight terms. However, a significant number of students plan to take nine or ten terms to reach graduation, using the extra time to master the material more thoroughly or to take extra courses. Students planning to take longer than eight terms are advised to plan well ahead and to consult with faculty in order to minimize problems arising from timetabling restrictions and prerequisite requirements. The General Regulations of the Faculty of Engineering, including minimum credit hour requirements that are listed under Bachelor of Science in Engineering, apply to the Electrical Engineering program.